LG WD-15439BDA El Manual Del Propietario página 15

H ow to use washer
The LED display shows the settings, estimated time remaining, options, and status messages for your
washer. When the washer is turned on, the display will illuminate.
1. CYCLE COMPLETION INDICATOR
This portion of the display shows which stage of
the wash cycle is currently underway (LOAD
SENSING, WASH, RINSE or SPIN
2. ESTIMATED TIME REMAINING
When the START/PAUSE button is pressed,
the washer automatically detects the wash load
(weight) and optimizes the washing time, based
on the selected cycle and options. The display
will then indicate the estimated time remaining
for the selected wash cycle.
NOTE: The cycle time displayed may appear
much longer than that of a top-loading washer.
The displayed time is for the complete cycle,
rather than just the agitation portion of the
cycle, as is typically shown on a top-loading
washer.
THE LED DISPLAY
3. DOOR LOCK INDICATOR
Indicates that the door is locked. The washer
door will lock while the washer is operating.
The door can be unlocked by pressing the
START/PAUSE button to stop the washer.
NOTE: If the temperature in the washer is too
high, the door cannot be unlocked until the
washer has cooled. If the water level is too
high, select the DRAIN & SPIN cycle to drain
excess water. Do not try to force open the door.
4. DELAY WASH INDICATOR
This indicator shows that the washer has been
set for DELAY WASH. The washer will start
automatically after the set delay time has
passed.
15