Metra 99-7812B Instrucciones De Instalación página 3

1. Attach the supplied (6) plastic clips
to the radio trim panel. (Figure A)
2. Attach the radio brackets to the
radio trim panel. (Figure B)
3. Attach the pocket to the bracket/
panel assembly using the
(4) #8 x 3/8" Phillips screws
provided. (Figure C)
4. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
5. Slide the radio into the assembly,
and then secure it using the screws
supplied with the radio. (Figure D)
Kit Assembly
(Figure A)
(Figure B)
99-7812B
6. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for proper
operation.
7. Install the completed assembly into
the dash, and then reassemble
the dash in reverse order of
disassembly.
3
(Figure C)
(Figure D)