Leveling The Dryer; Optional Accessories - LG DLE2140 Serie Manual Del Proprietário

LEvELING THE DRYER

wWARNING
• Wear gloves during installation.
• T he appliances are heavy.
Two or more people are required when installing
the dryer.
• Failure to follow these instructions can result in injury.
To ensure that the dryer provides optimal drying
performance, it must be level. To minimize
vibration, noise, and unwanted movement, the
floor must be a perfectly level, solid surface.
NOTE: Adjust the leveling feet only as far as
necessary to level the dryer. Extending the
leveling feet more than necessary can cause
the dryer to vibrate.
1
Position the dryer in the final location. Place
a level across the top of the dryer.

OPTIONAL ACCESSORIES

For these and other LG products, contact your local LG dealer, or visit our Web site at www.lg.com
Pedestal
(sold separately)
Level
Leveling Feet
Stacking kit
(sold separately)
(sold separately)
kit # 383EEL9001B
• All four leveling feet must rest solidly on the
floor. Gently push on the top corners of the
dryer to make sure that the dryer does not
rock from corner to corner.
If you are installing the dryer on the optional
pedestal, you must use the leveling feet on the
pedestal to level the dryer. The dryer leveling feet
should be fully retracted.
2
Use an adjustable wrench to turn the leveling
feet. Turn clockwise to raise the dryer or
counterclockwise to lower it. Raise or lower
the leveling feet until dryer is level from
side to side and front to back.
Make sure that all 4 leveling feet are in firm
contact with the floor.
LP CONvERSION kIT
Use the LP CONVERSION KIT for changing the dryer gas
connections from Natural Gas to Liquefied Propane Gas
Side vent kit
NOTE: Installation of the LP conversion kit must be
performed by a qualified service professional.
kit # 383EEL3002D
11