SmartLife SL-WMTL60M Manual De Instrucciones página 14

Take out the items out of
Check the label
the pockets
Put small clothes into the Turn easy-pilling and
pillow slip long-pile fabric inside out
When washing a single clothes, it may easily cause great eccentricity and give alarm due
to great unbalance. Therefore it is suggested to add one or two more clothes to be
washed together so that draining can be done smoothly.
Don't washing the clothes touching with kerosene, gasoline, alcohol and other
flammable materials.
The usage of detergent and Washing powder
As for the agglomerated or ropy detergent or additive, before they are poured into the
detergent box, it is suggested to use some water for dilution to prevent the inlet of
detergent box from being blocked and overflowing while filling water.
Please choose suitable type of detergent for the various washing temperature to get the
best washing performance with less water and energy consumption.
Knot the long strips,zip or
button
Separate clothes with
different textures
25
Control panel
4 4 5 4 4
The chart is for reference only, Please refer to real product as standard.
1. On/Off: Product is switched on or off.
2. Start/Pause: Press the button to start or pause the washing cycle.
3. Programs: Available according to the laundry type.
4. Options: This allows you to select an additional function and will light when selected.
5. Display: The display shows the settings, estimated time remaining, options, and status
messages for your washer. The display will remain on through the cycle.
Water level
Select water level according to clothing categories,
degree of soiling and washing habits of customers.
Functions
Combination of soaking, washing, rinsing and
spinning light is available
Rinse
Comsumer can select the rinsing times and water
cycle function.
Temp.
Press the button to regulate the Hot, warm, cold
water for wash.
Delay
Set the Delay function:
1. Select a program.
2. Press the Delay button to choose the time (the
delaying time is 0-24 H.)
3. Press [Start/Pause] to commence the delay
operation.
Cancel the Delay function:
Press the [Delay] button until the display be 0H.It
should be pressed before starting the programme.
If the programme already started, should press the
[On/Off] button to reset the programme.
3 4 2
26
1