Cooktop cooking
Using the warming center
The Warming Center, located in the back center of the glass surface, will keep hot,
cooked food at serving temperature.
NOTE
The surface warmer will not glow red like the cooking elements.
CAUTION
•
Do not warm food on the warming center for more than two hours.
•
Use only cookware and dishes recommended as safe for oven and cooktop use.
•
Always use potholders or oven mitts when removing food from the warming
center as cookware and plates will be hot.
•
When warming pastries and breads, the cover should have an opening to
allow moisture to escape.
•
Always start with hot food. Eating uncooked or cold food placed on the
warming center could result in illness.
1.
Turn the warming center on. Press the Warming Center On/Off pad.
2.
Select the power setting you want. Pressing the Warming Center Level pad
once will set it to the Lo setting.
Press the pad twice for the Med setting, 3 times for Hi.
3.
Turn the warming center off. Press the Warming Center On/Off pad.
NOTE
•
Pressing the Clear or OVEN OFF pad does not turn the warming center off.
•
For best results, all foods on the warming center should be covered with a
lid or aluminum foil. When warming pastries or breads, the cover should be
vented to allow moisture to escape.
Recommended settings
LEVEL
Lo
Breads/Pastries, Casseroles, Gravies, Eggs
Med
Dinner plate with food, Soups (cream), Vegetables, Sauces, Stews, Meats
Hi
Fried foods, Soups (liquid), Hot beverages
20 English
NE59N6630S_AA_DG68-01050A-00_EN+MES+CFR.indb 20
TYPE OF FOOD
Using the proper cookware
Using the right cookware can prevent many problems, such as uneven cooking or
extended cooking times. Using the proper pans will reduce cooking times and cook
food more evenly.
Check for flatness by rotating a ruler across
the bottom of the cookware.
CORRECT
Flat bottom and straight sides.
•
Tight fitting lids.
•
Weight of handle does not tilt
pan.
•
Pan is well balanced.
•
Pan size matches the amount
of food to be prepared and the
size of the surface element.
•
Made of a material that
conducts heat well.
Always match pot diameter to
element surface diameter.
INCORRECT
Curved and warped pan bottoms.
Pan overhangs element by more
than one-half inch.
Pan is smaller than element.
Heavy handle tilts pan.
1/31/2018 12:05:20 PM