O P E R AT I N G I N S T RU C T I O N S
SPECIAL FEATURES OF YOUR OVEN CONTROL
HOW TO SET PREHEATING ALARM LIGHT
ON/OFF
The interior oven light automatically turn on when the
oven door is opened.
When oven reaches set-temperature after preheat,
the oven notifies preheat-end by flashing oven lamp
until the door is opened.
You can activate or deactivate the smart oven light
feature. Default Setting is on.
Press and hold the "WARM" pad for 3
seconds. Then press the "WARM" pad
once and "PrE" will display.
Press the number 1 to switch between
ON and OFF.
Press the "START" pad to accept the
change.
HOW TO ADJUST BEEPER VOLUME
The beeper volume feature allows you to adjust the
volumes to a more acceptable volume. There are four
possible volume levels, Hi, Med, Lo and Off.
Press and hold the "WARM" pad for 3
seconds. Then press the "WARM" pad
twice and "BEEP" will display.
Press the number 1 Key pad to toggle
between the various beeper volumes.
Press the "START" pad to accept the
change.
NOTE:
When the display reads:
Hi or 3 = Highest volume
-- or 2 = Normal volume
Lo or 1 = Lowest volume
Off = Mute
22
HOW TO SELECT FAHRENHEIT OR CELSIUS
TEMPERATURE
Your oven control is set to use the Fahrenheit
temperature selections but you may change this to
use the Celsius selections.
Press and hold the "WARM" pad for 3
seconds. Then press the "WARM" pad
3 times and "Unit" will display.
Press the number 1 to switch between
the F and C.
Press the "START" pad to accept the
change.