Install Burner Grates; Check The Installation - Bosch NGM5456UC Manual Del Usuario

Ocultar thumbs Ver también para NGM5456UC:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Install Burner Grates

Properly position and install each burner grate as shown
in the illustration below.
24" 4 Burner
WARNING
9
To prevent flare-ups, properly support pots and
avoid spills, all grates must be properly positioned
on the cooktop whenever the cooktop is in use. Do
not use a grate if the rubber feet are missing or
damaged.
For replacement of rubber feet: Call Customer Support
at 1-800-944-2904.

Check the Installation

Place each correct sized burner cap in its seated,
notched position and check the operation of the electric
igniters. Check flame characteristics. Flame should be
blue with a minimal yellow tip on the outer cone of the
flames.
Checking Flame Characteristics
Yellow Flames:
Further adjustment is
required.
Yellow Tips on Outer
Cones:
Normal for LP Gas
Soft Blue Flames:
Normal for Natural Gas
Note: If the flame is completely or mostly yellow, verify
that the regulator is set for the correct fuel. After
adjustment, retest.
Some yellow streaking is normal during the initial start-
up. Allow unit to operate 4-5 minutes and re-evaluate
before making adjustments.
14

Publicidad

Tabla de contenido
loading

Tabla de contenido