Specific Safety Rules And Symbols - Hitachi CJ 110MV Manual De Instrucciones

Ocultar thumbs Ver también para CJ 110MV:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English

SPECIFIC SAFETY RULES AND SYMBOLS

1.
Hold tools by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will
make exposed metal parts of the tool "live" and shock the operator.
2.
ALWAYS wear ear protectors when using the tool for extended periods.
3.
NEVER touch the tool bit with bare hands after operation.
4.
NEVER wear gloves made of stuff liable to roll up such as cotton, wool, cloth or string,
etc.
5.
ALWAYS attach the side handle and securely grip the Rotary Hammer.
6.
NEVER touch moving parts.
NEVER place your hands, fingers or other body parts near the tool's moving parts.
7.
NEVER operate without all guards in place.
NEVER operate this tool without all guards or safety features in place and in proper
working order. If maintenance or servicing requires the removal of a guard or safety
feature, be sure to replace the guard or safety feature before resuming operation of the
tool.
8.
Use right tool.
Don't force small tool or attachment to do the job of a heavy-duty tool.
Don't use tool for purpose not intended —for example— don't use circular saw for
cutting tree limbs or logs.
9.
NEVER use a power tool for applications other than those specified.
NEVER use a power tool for applications other than those specified in the Instruction
Manual.
10. Handle tool correctly.
Operate the tool according to the instructions provided herein. Do not drop or throw
the tool. NEVER allow the tool to be operated by children, individuals unfamiliar with
its operation or unauthorized personnel.
11. Keep all screws, bolts and covers tightly in place.
Keep all screws, bolts, and plates tightly mounted. Check their condition periodically.
12. Do not use power tools if the plastic housing or handle is cracked.
Cracks in the tool's housing or handle can lead to electric shock. Such tools should not
be used until repaired.
13. Blades and accessories must be securely mounted to the tool.
Prevent potential injuries to youself or others. Blades, cutting implements and
accessories which have been mounted to the tool should be secure and tight.
14. Keep motor air vent clean.
The tool's motor air vent must be kept clean so that air can freely flow at all times.
Check for dust build-up frequently.
6
Prolonged exposure to high intensity noise can cause hearing loss.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cj110mva

Tabla de contenido