Installation; General Information; Safety Precautions; Stove Installation Site - Palazzetti ECOFIRE GINGER Generalidades - Advertencias - Instalación - Mantenimiento

Ocultar thumbs Ver también para ECOFIRE GINGER:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5 INSTALLATION

5.1 GENERAL INFORMATION

The following paragraphs provide instructions that
must be complied with in order to ensure maximum
The following instructions are however subordinate
to compliance with any national, regional and local
laws and standards in force in the country where
the product is installed.
in compliance with EN 10683.

5.2 SAFETY PRECAUTIONS

Responsibility for work carried out in the place
where the stove is installed lies with the user;
the user is also responsible for making sure the
installation checks are completed.
The user must abide by all local, national and
European safety requirements.
suitable load-bearing capacity.
The stove assembly and dismantling instructions
are reserved exclusively for specialist technicians.
Users should always contact our service centre
technicians.
Before having work performed by other technical
personnel
verify
competence. Before starting to assemble or
dismantle the stove, the installer must heed the
A) do not work in adverse conditions;
B)
for working and make sure that personal
protective equipment is in perfectly working
order;
C) always wear safety gloves;
D) always wear safety shoes;
E) always use electrically insulated tools;
F) make sure that the area being used for
assembly and dismantling is clear of any
obstacles.
their
effective
technical

5.3 STOVE INSTALLATION SITE

The enclosed "Product technical details" show the
minimum clearances from combustible materials
and objects expressed in centimetres that must
be observed when positioning the stove; for non-
halved.
to excessive heat.
wood, parquet, linoleum, laminates or carpets
base underneath stove. Such base may be made
from steel, slate, glass or stone and must cover
at the front.
The manufacturer declines all liability for any
alterations to the characteristics of the material
base.
Any elements made from wood (e.g. beams) or
other combustible material located near the stove
Flammable walls or elements must be kept at
least 150 cm away from the stove.
Leave enough clearance for maintenance work.
materials (x) is observed, as shown on the pipes
Pi
Pp = Protezione pavimento
Pi
150 cm
Pp
Pi
27

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ecofire elisabethEcofire noahEcofire idro

Tabla de contenido