Compliance With Weee Directive And Disposing Of The Waste Product; Package Information; Hc Warning; Recommendations For The Fresh Food Compartment - Beko BFTF2716 Serie Manual Del Usuario

Compliance with WEEE Directive and
Disposing of the Waste Product:
This product complies with EU WEEE
Directive (2012/19/EU). This product bears
a classi cation symbol for waste electrical
and electronic equipment (WEEE).
This product has been manufactured with high quality
parts and materials which can be reused and are
suitable for recycling. Therefore, do not dispose the
product with normal domestic waste at the end of its
service life. Take it to a collection point for the
recycling of electrical and electronic equipment.
Please consult your local authorities to learn the
nearest collection point. Help protect the environment
and natural resources by recycling used products.
For children' s safety, cut the power cable and break
the locking mechanism of the door, if any, so that it
will be non-functional before

Package information

Packaging materials of the product are manufactured
from recyclable materials in accordance with our
National Environment Regulations.Do not dispose
of the packaging materials together with the domestic
or other wastes.Take them to the packaging material
collection points designated by the local authorities.
Do not forget :
Any recycled substance is an indispensable matter for
nature and our national asset wealth. If you want to
contribute to re-evaluation of the packaging materials
you can consult to your environmentalist organizations
or the municipalities where you are located.

HC warning

If your product's cooling system contains R600a:
This gas is ammable. Therefore, pay attention to not
damaging the cooling system and piping during usage
and transportation. In the event of damage,usage and
3

Installation

In case the information which are given in the user
manual are not taken into account, manufacturer will
not assume any liability for this.
Points to be paid attention to when the
relocation of the refrigerator
1. Your refrigerator should be unplugged.Before
transportation of your refrigerator, it should be
emptied and cleaned.
2. Before it is re-packaged,shelves, accessories, crisper, etc.
inside your refrigerator should be xed with adhesive
tape and secured against impacts. Package should
be bound with a thick tape or sound ropes and the
transportation rules on the package should be
strictly observed.
3. Original packaging and foammaterials should be
kept for future transportations or moving.
Before you start the refrigerator,
Check the following before you start to use your
refrigerator:
disposing of the product.
3
transportation. In the event of damage,keep your
product away from potential re sources that can
cause the product catch a re and ventilate the room
in which the unit is placed.
Ignore this warning if your product's cooling system
contains R134a.
Type of gas used in the product is stated in the type
label which is on the left wall inside the refrigerator.
Never throw the product in re fordisposal.
Recommendations for the fresh food compartment *optional
Do not allow the food to touch the temperature sensor
in fresh food compartment. To allow the fresh food
compartment keep its ideal storage temperature
sensor must not be hindered by food.
Do not place hot foods in the product.

Things to be done for energy saving

• Do not leave the doors of your refrigerator open for a long time.
• Do not put hot food or drinks in your refrigerator.
• Do not overload your refrigerator so that the air circulation
inside of it is not prevented.
• Do not install your refrigerator under direct sunlight or near heat
emitting appliances such as ovens, dishwashers or radiators.
Keep your refrigerator at least 30cm away from heat emitting
sources and at least 5cm from electrical ovens.
• Pay attention to keep your food in closed containers.
• For products with a freezer compartment You can store
maximum amount of food items in the freezer when you
remove the shelf or drawer of the freezer. Energy
consumption value stated for yourrefrigerator has been
determined has been determined by removing freezer
shelf or drawer and under maximum load. There is no
harm to use a shelf or drawer according to the shapes and
size of food to be frozen.
• Thawing frozen food in fridge compartment will both
provide energysaving and preserve the food quality.
1. Clean the interior of the refrigerator as recommended in the
"Maintenance and cleaning" section.
2. Connect the plug of the refrigerator to the wall socket.When
the fridge door is opened, fridge internal lamp will turn on.
3. When the compressor starts to operate, a sound will be
heard. The liquid and gases sealed with in the refrigeration
system may also give rise to noise, even the compressor is
not running and this is quite normal.
4. Front edges and both sides of the refrigerator may feel
warm. This is normal. These areas are designed to be warm
to avoid condensation.
Important:
The connection must be in compliance with national regulations.
• The power plug must be easily accessible after installation.
• Electrical safety of your refrigerator shall be guaranteed only
if the earth system in your house complies with standards.
• The voltage stated on the label located at left inner side
of your product should be equal to your network voltage.
• Extension cables and multi plugs must not be used for
connection.
EN