Descargar Imprimir esta página

For Products With A; Water Dispenser; Child Safety; Compliance With Weee Directive And Disposing Of The Waste Product - Beko TSE1284N Manual Del Usuario

Ocultar thumbs Ver también para TSE1284N:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 342
1

For products with a

water dispenser;

Pressure for cold water
inlet shall be maximum
90 psi (6.2 bar). If your
water pressure exceeds
80 psi (5.5 bar), use a
pressure limiting valve
in your mains system. If
you do not know how
to check your water
pressure, ask for the
help of a professional
plumber.
If there is risk of water
hammer effect in your
installation, always
use a water hammer
prevention equipment
in your installation.
Consult Professional
plumbers is you are not
sure that there is no
water hammer effect
1
in your installation.
Do not install on the
hot water inlet. Take
precautions against
of the risk of freezing
of the hoses. Water
temperature operating
interval shall be 33°F
(0.6°C) minimum
and 100°F (38°C)
maximum.
Use only potable water.

Child safety

If the door has a lock,
the key should be kept
away from reach of
children.
Children must be
supervised to prevent
them from tampering
with the product.
Compliance with WEEE
Directive and Disposing of
the Waste Product:
(WEEE).
9
EN
This
product
with EU WEEE
(2012/19/EU). This product
bears
a
classification
symbol for waste electrical
and electronic equipment
complies
Directive

Publicidad

loading