Craftsman 247.378970 Manual Del Usuario página 19

Problem
Uneven cut
Mower will not self propel
TROUBLESHOOTING
Cause
1. Dull blade.
2. Wheels not positioned correctly.
1. Debris clogging drive operation.
2. Damaged or worn belt.
3. Drive control out of adjustment.
1. Sharpen or replace blade.
2. Adjust cutting height lever on left front and left rear wheel to
same position.
1. Stop engine, disconnect spark plug boot, and clean out debris.
2. Have belt replaced by a Sears or other qualified service dealer.
3. Adjust drive control. See Assembly section.
19
Remedy