Sauder Dresser Manual Del Usuario página 6

Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push twenty-two HIDDEN CAMS (AA2) into the
å
ENDS (A and B), UPRIGHT (C), BOTTOMS (E), and
DRAWER BRACES (M65). Then, insert the metal end of
ten CAM DOWELS (CC2) into the HIDDEN CAMS.
Do not tighten the HIDDEN CAMS in this step.
Do not insert CAM DOWELS into these edges.
Arrow
Hole
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Page 6
B
A
Do not insert
CAM DOWELS
into these parts.
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=1612
to watch a video on how to assemble your unit.
E
C
M65
M65
M65
M65
M65
410287
CC2
Arrow
(10 used)
(22 used)
E
Arrow
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
M65
Arrow
AA2
www.sauder.com/services
AA2