Greencut GLM560L-20 Manual De Instrucciones página 59

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

INSTALLING/REMOVING THE MULCHING PLUG
To remove the mulching plug, lift the rear discharge
door (1).
Grasp the handle (2) of the mulching plug.
Lift and pull the mulching plug out using the handle.
The mulching plug (3) is in serted at an angle, so it requ
ires some force to remove it.
The mulching plug must be removed in order to inst all
the grass catc her bag.
The mulching plug must be re-inst alled when the grass
catc her bag is removed.
NOTE: When mulching, do not install
either the side discharge deflector or the
grass catcher bag.
INSTALLING SIDE DISCHARGE CHUTE
Lift the side discharge cover (1).
Align the grooves (2) on the discharge chute (3) with
the pins (4) on the underside of the discharge cover (1).
Lower the discharge chute until the hooks on the mower
deck are secured in the openings in the discharge chute.
Release the side discharge cover.
NOTE: When using side discharge, do not
install the the grass catcher bag. Ensure
the mulch plug is installed.
TO INSTALL/REMOVE BATTERY PACK
TO INSTALL BATTERY PACK
Lift and hold up the battery door (1).
Align the battery (2) with the mower's battery port.
Make sure the battery release button (3) snaps in place
and that battery is fully seated and secure in the mower
before beginning operation.
If the machine is not going to be used immediately,
remove the battery.
TO REMOVE BATTERY PACK
Release the bail lever to stop the mower.
Press the battery release button (3) on the mower. Open
the battery door.
Remove battery from the mower.
1
2
3
4
2
2
59
EN
1
3
1
3

Publicidad

Tabla de contenido
loading

Tabla de contenido