Chapter 2. Transport And Installation - gala gar GALA MIG 2300 ALU 4R Manual Técnico De Instrucciones

2. TRANSPORT AND INSTALLATION.
Knocks and sudden movements must be avoided when transporting the equipment. The transport position
will be shown by arrows on the packaging. In any case, the packaging must be protected from water.
Once the equipment has been unpacked the wheels must be mounted:
GALA MIG 1810 – 2300 ALU - 2600
11º
9º
10º
1º
8º
12º
The welding equipment location must satisfy the following requirements:
Place: Dry and ventilated, far enough away from the cutting area in order to prevent the metal dust caused
by the cutting process from getting into the equipment.
Electrical installation. Electrical elements of the installation.
Protection system
Connection
plug.
Magnetothermal
switch (Curve
"D")
Differential
circuit breaker.
(Minimum)
GALA MIG 1810
Length 230 V
10 m 4 mm 2
15-20 m 6 mm 2
When the equipment leaves the factory it is tagged with the voltage of use that has been selected internally.
In dual-voltage three-phase equipment the voltage can be changed by accessing the inside of the equipment.
Remove the side panel. On the inside you will find a connection card (this is protected with a plastic cover).
Make the machine connection as shown in the Figure.
STANDARD EQUIPMENT (230/400 V)
GALA MIG (V. COMPACTA). Manuel d'Instructions
7º
3º
6º
2º
4º
5º
GALA MIG 1810
16A 2P + T
DO NOT FORGET TO FIT THE EARTH CONNECTION INTO THE PLUG.
2P 20 A 230V
2P 25A/300 mA
Power supply hose (RVK-1KV).
GALA MIG 2300 ALU 4R
400 V 230 V
2.5 mm 2 2.5 mm 2
4 mm 2 4 mm 2
Voltage change system.
230 V
400 V
GALA MIG
GALA MIG 2300 ALU
16A 3P + T
3P 15 A - 230V
3P 10 A - 400V
3P 25A/300 mA
GALA MIG 2600
400 V 230 V
2.5 mm 2 2.5 mm 2
2.5 mm 2 4 mm 2
SPECIAL EQUIPMENT (220/440 V)
4000
6º
5º
GALA MIG 2600 GALA MIG 4000
32A 3P + T - 230V 32A 3P + T - 230V
16A 3P + T - 400V 16A 3P + T - 400V
3P 20 A - 230V 3P 25 A - 230V
3P 15 A - 400V 3P 20 A - 400V
3P 25A/300 mA 3P 25A/300 mA
GALA MIG 4000
400 V 230 V
2.5 mm 2 4 mm
4 mm 2 6 mm
220 V
440 V
13
7º
3º
2º
4º
400 V
2 4 mm 2
2 4 mm 2