Appendices - gala gar GALA MIG 2300 ALU 4R Manual Técnico De Instrucciones

GB APPENDICES. ELECTRICAL DRAWINGS AND REFERENCE PART LISTS.
•
DECLARATION OF CONFORMITY & EC MARKING
•
ELECTRICAL DIAGRAMS.
•
DETAIL DRAWINGS AND REFERENCE LISTS.
RECOMMENDATIONS FOR REDUCING ELECTROMAGNETIC COMPATIBILITY (CEM) PROBLEMS
The user is responsible for the installation and use of the welding material according to the instructions in this manual and the following
recommendations.
Before installing the welding material, the presence of the following in the surrounding area must be kept in mind:
•
Wiring for power, control, signalling, and telephones.
•
Radio and television receivers and transmitters.
•
Computers and other control equipment.
•
Critical security equipment.
•
People with pace makers or hearing aids.
•
Measurement and calibration equipment.
In order to reduce EMC problems, keep in mind the time of day when welding or other activities will be carried out. Move possible
interference victims away from the welding installation.
ALWAYS CONNECT THE MACHINE TO POWER USING AN EFFICIENT EARTH TAP.
IF PROTECTIVE DEVICES OR SUPPLEMENTARY ELECTRICAL SYSTEM FILTERS ARE NEEDED, CONSULT OUR TECHNICAL
PERFORM THE MAINTENANCE OPERATIONS DESCRIBED IN THIS MANUAL.
USE THE SHORTEST WELDING WIRES POSSIBLE AND KEEP THEM PLACED NEXT TO EACH OTHER NEAR THE FLOOR.
IF THE WELDING PIECE IS GROUNDED, KEEP IN MIND OPERATOR SAFETY AND NATIONAL REGULATIONS.
GALA GAR guarantees correct operation against all manufacturing defects of the GALA MIG 1810, GALA MIG 2000, GALA MIG
2300 ALU y GALA MIG 2600 products, as from the purchase date (guarantee period) of:
• 12 MONTHS
This guarantee will not be applied to components with a working life that is less than the guarantee period, such as spares and
consumables in general.
In addition, the guarantee does not include the installation, start-up, cleaning or replacement of filters, fuses and cooling or oil
refills.
If the product should present any defect during the guarantee period, GALA GAR undertakes to repair it without any additional
charge, unless the damage caused to the product is the result of accidents, improper use, negligence, inappropriate accessories,
unauthorized servicing or modifications to product not carried out by GALA GAR.
The decision to repair or replace parts or supply a new appliance will depend on the criterion of GALA GAR. All replaced parts
and products will be the property of GALA GAR.
In order for the guarantee to become effective the product and the purchase invoice must be handed over, duly completed and
stamped by an authorized Technical Service. Shipping and transport expenses will be on the user's account.
Damage or unforeseen or indirect expenses resulting from an incorrect use will not be the responsibility of GALA GAR.
GALA MIG (V. COMPACTA). Instructions Manual.
FORMULA FOR MAKING ORDERS FOR SPARE PARTS:
Indicate:
1º. Machine, Reference and Serial no.
2º. Supply Voltage / Frequency.
3 - No. of parts, description and reference of it.
EXAMPLE:
GALA MIG 2600, Ref. 438.00.000 Nº 040406012
(230/400V-50/60 Hz)
1 U. ELECTRONIC CARD, Ref. 435.16.028
GENERAL GUARANTEE CONDITIONS:
SERVICE.
36