Chapter 2. Transport And Installation - gala gar DTCW-4R Manual Técnico De Instrucciones

CHAPTER 2. TRANSPORT AND INSTALLATION.

Knocks and sudden movements must be avoided when transporting the equipment. The transport position
will be shown by arrows on the packaging. In any case, the packaging must be protected from water.
2.1. ELECTRICAL SUPPLY INSTALLATION.
The electrical installation of the equipments making up the system must be carried out by specialised
personnel according to the applicable standards.
The location must fulfil the following conditions:
Place: Dry and ventilated. Far enough away from the welding area in order to prevent the metal dust
caused by the working process from getting into the equipment. The equipment must not be used in the rain.
PLACE THE WELDING MACHINE ON A FIRM FLAT SURFACE.
IF EQUIPMENT OF THIS KIND TIPS OVER IT CAN HAVE VERY SERIOUS CONSEQUENCES.
Ítem Reference
66700000
1
66012080
19052614
19051814
66799999
481P101024
481P102067
2 481P102018
481P102068
481P102019
481P011130
481P012130
63716017
3 43812219
4 66712065
5 66712096
Before starting the wire threading phase, make sure that your torch is compatible with the Euro connection
system and that the wire liner is enabled.
Remember that the torch liner must be made of a non-conductive material to avoid possible contact problems
between the wire and the sheet to be welded.
DTCW-4R - Manual de Instrucciones
Description
DTCW-4R Wire Feeder
Wheels KIT
XT-26 welding torch - cable 4 m
XT-18 water cooled welding torch - cable 4 m
Euro connection with cold wire liner
Cold Wire KIT for XT18.26 Torch
Outlet Tip Nozzle for 0.8 mm wire
Outlet Tip Nozzle for 1.0 mm wire
Outlet Tip Nozzle for 1.2 mm wire
Outlet Tip Nozzle for 1.6 mm wire
Pencil TIG Torch 3 m for 0.6-1.0 mm cold wire
Pencil TIG Torch 3 m for 1.2-1.6 mm cold wire
Male straight aerial connector 9v
Earth cable 4 m - 35 mm
Wire feeder to Power source connection
Welding Current Adjustment Pedal
2
Remarks
OPTIONAL
Air cooled torch option
Water cooled torch option
Accessories for standard torch
Torch Input Option
Independent input option
Independent input option
Included in Wire Feeder delivery
Included in Wire Feeder delivery
Included in Wire Feeder delivery
OPTIONAL
11