Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN APPENDICES. ELECTRICAL DRAWINGS AND REFERENCE PART LISTS.
•
DECLARATION OF CONFORMITY & EC MARKING
•
ELECTRICAL DIAGRAMS.
•
DETAIL DRAWINGS AND REFERENCE LISTS.
RECOMMENDATIONS FOR REDUCING ELECTROMAGNETIC COMPATIBILITY (CEM) PROBLEMS.
The user is responsible for the installation and use of the welding material according to the instructions in this manual and the following
recommendations.
Before installing the welding material, the presence of the following in the surrounding area must be kept in mind:
•
Wiring for power, control, signalling, and telephones.
•
Radio and television receivers and transmitters.
•
Computers and other control equipment.
•
Critical security equipment.
•
People with pace makers or hearing aids.
•
Measurement and calibration equipment.
In order to reduce EMC problems, keep in mind the time of day when welding or other activities will be carried out. Move possible
interference victims away from the welding station.
ALWAYS CONNECT THE MACHINE TO POWER GRID USING AN EFFICIENT GND.
IF PROTECTIVE DEVICES OR SUPPLEMENTARY ELECTRICAL SYSTEM FILTERS ARE NEEDED, CONSULT OUR TECHNICAL
PERFORM THE MAINTENANCE OPERATIONS DESCRIBED IN THIS MANUAL.
USE THE SHORTEST CONDUCTOR CABLES POSSIBLE AND KEEP THEM PLACED NEXT TO EACH OTHER NEAR THE
IF THE PIECE TO BE WELDED IS GROUNDED, KEEP IN MIND THE OPERATOR SAFETY AND NATIONAL REGULATIONS.
GALA GAR, S.A. guarantees correct operation against all manufacturing defects of the DTCW-4R WIRE
FEEDER, as from the purchase date (warranty period) of:
•
12 MONTHS
This warranty will not be applied to components with a working life that is shorter than the warranty
period, such as spares and consumables in general.
In addition, the warranty does not include the installation, start-up, cleaning or replacement of filters,
fuses and cooling or oil refills.
If the product should present any defect during the warranty period, GALA GAR, undertakes to repair it
without any additional charge, unless the damage caused to the product is the result of accidents,
improper use, negligence, inappropriate accessories, unauthorized servicing or modifications to the
product not carried out by GALA GAR.
The decision to repair or replace parts or supply a new appliance shall be at the discretion of GALA
GAR. All replaced parts and products will be the property of GALA GAR.
In order for the warranty to become effective the product and the purchase invoice must be handed
over, duly completed and stamped by an authorized Technical Service. Shipping and transport expenses
shall be borne by the user.
Damage or unforeseen or indirect expenses resulting from an incorrect use will not be the responsibility
of GALA GAR.
DTCW-4R - Manual de Instrucciones
SERVICE.
FLOOR.
GENERAL TERMS OF WARRANTY
16
Publicidad
Tabla de contenido
