Auxiliary Handle Fixing; Trigger, Lock And Reverse Operation - Pecol MCSDSP850PRO Manual Del Usuario

This hammer also has a clutch system to increase the protection of the user through
the relief of the spin in case of a locking followed by excessive torque. If you notice that
the clutch has been engaged (stopping the drill while the engine is still spinning), turn
off the machine immediately and correct the operating conditions before starting again.
Despite the clutch protection, do not use the locking button during drilling operations, as
if the drill gets stuck, a serious accident may occur. The lock button should only be used
for auxiliary activities.
Avoid frequent operation of the clutch system. A constant drive will cause premature
wear (see page 64).

3.6. Auxiliary handle fixing

3.7. Trigger, Lock and Reverse operation

Push the reverse button all the way. Inefficient or even stopped operation may occur
if the button is incorrectly positioned. Do not invert the direction of rotation until the
machine is completely stopped.
P.56
PT ES
Speed
proportional to
the tightness
EN FR
Counterclockwise
(backlash)
Clockwise
(forward)
Blockage to keep it
running.
Do not use in
drilling operations.