Installation And Removal Of Drills, Chisels Or Accessories - Pecol MCSDSP850PRO Manual Del Usuario

An operation at low rotation for a long period of time tends to cause a greater heating
of the machine. Promote the machine operation unladen and high rotatation for 2 to 3
minutes to normalise the temperature. The hammer when new needs an operating time
between 3 to 5 hours to reach its maximum efficiency.

3.8. Installation and removal of drills, chisels or accessories

1
3
Never change the operating mode
while the machine is still spinning.
2
After a long period of work, the
installed tool may be hot. Avoid
direct contact with the skin
when removing it.
FR EN ES
P.57
PT