Operation Via Dip Switches; Dmx-Controlled Operation - EuroLite LED PAR-56 Manual Del Usuario

OPERATION VIA DIP SWITCHES

Auto Mode
In order to select Color change and Color fade, set DIP switch 9 and 10 to OFF. Set DIP switches 1 – 6 to
OFF as well.
Speed can be adjusted via DIP switches 7 and 8.
In order to select Static colors and flash, set DIP switch 9 and 10 to OFF. Set DIP switches 7 and 8 to OFF
as well.
DIP switch 1 to 3 control the color settings.
DIP switch 4 to 6 control the flash settings.
Sound Control
In order to select Sound controlled color change, set DIP switch 9 to ON and DIP switch 10 to OFF.

DMX-CONTROLLED OPERATION

You can control the spots individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
For DMX-controlled operation set DIP Switches 1 and 10 to ON. (This setting is also used to determine the
Slave device).
Addressing the device
Each device occupies 5 channels. To ensure that the control signals are properly directed to each device,
the device requires addressing. This is to be adjusted for every single device by changing the DIP switches
as set out in the table below.
20/40 51913624_V_1_2.DOC