Philips Norelco AXE XA525 Manual De Instrucciones página 18

English
18
12_XA525.indd 18
3 Lift the retaining ring out of the shaving head
holder.
4 Remove the cutter and comb and separate the
cutter from the comb.
Tip: Do not clean more than one cutter and
comb at a time as they are matching sets. If
you accidentally put a cutter in the wrong
comb, it may take several weeks before
optimal shaving performance is restored.
5 Clean the inside and outside of both the cutter
and comb with the supplied brush.
6 Place the comb in the shaving head holder
making sure the two wings fit exactly in the
recesses of the shaving head holder.
7 Place the cutter into the shaving head holder
with the cutter legs pointing down.
8 Reattach the retaining ring (1) by turning it
the opposite direction of the arrows on the
retaining ring (2).
Make sure the four wings of the retaining ring
are located exactly under the recesses of the
shaving head holder.
9 Reattach the shaving unit to the shaving
attachment. If it does not close smoothly, check
11/12/12 11:36 AM