Replacing The Shaving Unit Razor Heads - Philips Norelco AXE XA525 Manual De Instrucciones

12_XA525.indd 19
that the shaving heads and retaining rings are
positioned properly.
Cleaning the Bodygroom Attachment
1 If a trimming comb is attached to the appliance,
remove it.
2 Pull the bodygroom foil off the attachment.
Do not apply pressure to foil. Do not touch foil
with hard objects as this may dent or damage foil or
cutters. If damage occurs, replace damaged parts.
3 Rinse the bodygroom attachment, foil and
comb under hot water.
You can also clean the attachment, foil and comb
with the supplied brush.
4 Shake off excess water and allow to air dry
thoroughly.
5 Place bodygroom foil back on the attachment.

rEplacing thE shaving unit razor hEads

- Replace the Shaving Unit razor heads every 12
months for optimal results.
- Replace with RQ32 Philips Norelco razor heads
only
1 Follow steps 1-4 under 'Extra-thorough
Cleaning Method' section.
English
19
11/12/12 11:36 AM