Picture Control; Using Automatic Picture Settings - Samsung HL-T7288W Manual Del Usuario

Picture Control

Using Automatic Picture Settings

Your new DLP TV gives you optimal control over the picture you're watching. You can change the screen size, improve the
image quality, even watch something else without turning off what you're currently watching. Please be aware that the best
picture on this TV will be obtained from High Definition (HD) sources such as Digital cable or DVD players.
Your TV has three automatic picture settings ("Dynamic", "Standard", "Movie") that are preset at the factory.
You can activate a Picture Setting by making a selection from the menu.
1 Press the MENU button.
Press the ENTER button to select Picture.
Press the ENTER button again to select Mode.
2 Press the ▲ or ▼ button to select Dynamic, Standard, or Movie, then press the
ENTER button.
 Choose Dynamic to increase the clarity and sharpness of the picture.
 Choose Standard for general TV watching mode.
 Choose Movie when watching movies.
Press the P.MODE button on the remote control to select one of the standard picture
settings.
3 Press the ▲ or ▼ button to select Contrast, Brightness, Sharpness, Color, or
Tint (G/R), then press the ENTER button.
➢
Tint (G/R) is not available in DTV or PC mode.
4 Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
➢ ● Each adjusted setting will be stored separately according to its input mode.
● When you make changes to Contrast, Brightness, Sharpness, Color, or
Tint (G/R), OSD color will also be adjusted accordingly.
5 Press the ▲ or ▼ button to select Color Tone, then press the ENTER button.
English - 28
Continued...