To Select The Source; To Edit The Input Source Name - Samsung HL-T7288W Manual Del Usuario

To Select the Source

Use to select TV or other external input sources such as DVD players, VCRs, etc. connected to the TV.
1 Press the MENU button.
Press the ▲ or ▼ button to select Input, then press the ENTER button.
Press the ENTER button to select Source List.
2 Press the ▲ or ▼ button to select a signal source, then press the ENTER button.
Press the EXIT button to exit.
➢ You can choose between the following sets of jacks: TV, AV1, AV2, S-Video1, S-Video2,
Component1, Component2, PC, HDMI1, HDMI2, or HDMI3/DVI on the TV's rear panel
and AV3 or USB on the TV's side panel.
➢ HDMI1, HDMI2, or HDMI3/DVI input can only be selected when the external device is
turned on and connected via HDMI.
➢ You can choose only those external devices that are connected to the TV.
Press the SOURCE button on the remote control to view an external signal source.

To Edit the Input Source Name

Name the external device connected to the input jacks to make your input source selection easier.
1 Press the MENU button.
Press the ▲ or ▼ button to select Input, then press the ENTER button.
Press the ▲ or ▼ button to select Edit Name, then press the ENTER button.
2 Press the ▲ or ▼ button to select AV1, AV2, AV3, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, HDMI2, or HDMI3/DVI input jack, then press the ENTER
button.
3 Press the ▲ or ▼ button to select VCR, DVD, D-VHS, Cable STB, HD STB, Satellite
STB, PVR STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DVD
HDD Recorder, PC, Internet TV Recv., Interactive TV Recv., VOD STB, or TV input
source, then press the ENTER button.
Press the EXIT button to exit.
English - 27