Samsung WF431AA Manual De Usuario página 28

troubleshooting
ERROR IMAGE
nF1
Sr
OE
E2
tE
3E
AE
SF1
SF2
SF3
SUdS
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
28_ Troubleshooting
WF431ABP-03016A_EN.indd Sec6:28 WF431ABP-03016A_EN.indd Sec6:28
MEANING
The hot/cold water hose connection is
not correct.
Problem with control.
A fault is detected in the water level
sensor.
Jammed key.
Temperature sensor problem.
Motor problem.
Communication error between SUB
PBA and MAIN PBA
System error
Too many suds are detected during the
washing session.
The unit is put on hold until the suds
are reduced. Then, the unit will go back
into the operation.
When it finishes washing, "End" and
"SUdS" codes will blink in turn.
SOLUTION
Please connect the hot/cold water hose
connection correctly.
Call for service.
Call for service
Call for service
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Call for service
Call for service
Reduce the amount of detergent you
use.
2011-01-11 ¿ÀÈÄ 3:18:04 2011-01-11 ¿ÀÈÄ 3:18:04