Ferm WEM1035 Traducción Del Manual Original página 4

EN
Keep bystanders away.
Do not expose in rain
Wear ear and eye protection.
Wear protective gloves.
Always use a welding mask during
welding
Wear protecting clothes
Standard for welding appliances for
EN60974-6
manual metal arc welding with
limited duty.
EMC classification in accordance with
IEC 60974-10
Electrode holder
Earth terminal
Falling voltage
Single-phase transformer
Supply circuit, phases 1 or 3 ~50 Hz
Electrode diameter
Fusing 16A
I
Maximum I1 max primary current
1 max
intensity in Ampere
I
Secondary current intensity in Ampere
2
4
All manuals and user guides at all-guides.com
IP21S
H
U
U
U
l
1eff
General safety instructions for welding
appliances
•
•
•
•
•
Specific safety instructions for welding
appliance
•
•
•
•
•
•
Rated maximum welding time in
intermittent
Rated maximum welding time in
continuous mode
Protection class. Sealed for objects up to
12 mm and against perpendicular falling
drip water. Stoppage with water control.
Insulation class
Rated no-load voltage
0
Rated supply voltage
1
Values of the conventional load voltage
2
Maximum effective supply current
The user of the machine must have been
instructed how to use and operate the machine.
Ensure a well-illuminated and tidy working
environment.
Always remove the plug from the plug socket
before carrying out maintenance on the
machine.
Remove the plug from the plug socket when
you leave the machine.
Do not use the machine before you have fully
assembled and installed the machine as
described in the manual.
Welding causes sparks and hot metal. Remem-
ber that this is a fire hazard, and remove all
flammable objects from the working environment.
Ensure good ventilation in the working
environment. Gases are released when
welding that are a danger to your health.
Do not weld containers or pipes that contain or
have contained flammable liquids or gases
(danger of fire or explosion).
Do not weld materials that have been cleaned
with highly flammable liquids or that have
painted surfaces (likelihood of the release of
dangerous gases).
Do not work in a humid or wet environment
and do not weld in the rain.
Always protect your eyes with the welding
Ferm