Troubleshooting - autoXS FLX-WH-01US Manual Del Usuario

Troubleshooting

Troubleshooting
Problem
Jack doesn't
lift the
vehicle.
Jack doesn't
lower the
vehicle.
Visible
damages.
Jack is
leaking oil.
The jack
makes
noises
when
lifting or
lowering a
vehicle.
18
Possible causes
− Not enough oil.
− Dirty oil is blocking
the release valve.
− Release screw
not fully closed.
− Release screw is not
fully open.
− Too much oil is in the
oil cylinder.
− Dirty oil is blocking
the release valve.
− Cracked or bent
parts from falling or
other impacts.
− The cylinder or seals
may be broken.
− Moving parts of the
jack are not fully
lubricated.
− The cylinder is
broken.
Solution
− Refi ll oil (see chapter
"Maintenance, service,
and inspection").
− Change the oil (see
chapter "Maintenance,
service, and inspection").
− Fully close the release
7
is
screw.
− Fully open the release
screw.
− Let some oil out of the
oil cylinder (see chapter
"Maintenance, service,
and inspection").
− Change the oil (see
chapter "Maintenance,
service, and inspection").
− Have the jack inspected
and/or repaired by
qualifi ed personnel.
− Contact the
manufacturer via the
service address on the
warranty card.
− Lubricate the affected
parts with some oil.
− Contact the
manufacturer via the
service address on the
warranty card.