Maintenance, Service, And Inspection - autoXS FLX-WH-01US Manual Del Usuario

Maintenance, service, and inspection

CAUTION!
A working area contaminated with oil can cause the jack to
slip and result in damage and/or personal injury.
− Thoroughly clean the area where the work will take place
before raising or lowering vehicles in this area.
• Lubricate all moving parts at regular intervals.
• The oil in the oil cylinder should be changed every
3 years.
− Always check the jack before each use.
− Check for cracks, cracked welds and missing and/or loose
and/or damaged parts. If the jack appears to be damaged
or deformed in any way, do not use the jack.
− If you believe that the jack has been subjected to an
abnormal load or shock, the jack must be inspected
immediately by the manufacturer.
Contact the manufacturer via the service address
indicated on the warranty card.
− If the jack has any problems or missing parts, is damaged,
deformed, or cracked, contact the manufacturer via the
service address indicated on the warranty card.
Risk of damage and injury!
Maintenance, service, and inspection
19