Refi Lling The Oil - autoXS FLX-WH-01US Manual Del Usuario

Maintenance, service, and inspection
Refi lling the oil
Filling the oil cylinder with too much oil can cause the jack to
become overloaded, resulting in injury.
− Only fi ll the oil cylinder with the amount recommended in
this chapter.
NOTICE!
Using the wrong oil may damage the jack or cause it to
malfunction.
− Only use the type of oil as given in the chapter "Technical
data."
1. Fully lower the jack, make
sure the release screw
turned fully clockwise, and
lift up the cover plate
2. Carefully lift up and remove
the rubber seal
cylinder
13
head screwdriver.
3. Fill the oil until the piston
rod of the cylinder is barely
covered. Make sure that no oil is spilled. If necessary, use a
small funnel to fi ll the oil.
4. Clean the rubber seal and insert it back into the oil
cylinder, making sure to press it fi rmly back into place.
5. Lower the cover plate.
20
Risk of injury!
Risk of damage!
7
3
of the oil
12
up with a fl at-
.
13
12