Sunex HD 6606 Manual Del Propietário página 4

El manual del propietario (17 páginas)

página de 14

/ 14
Marcadores

Idiomas disponibles

OWNER'S MANUAL

PREVENTATIVE MAINTENANCE (CONT.)

Always store the jack in a well protected area where it will not be exposed to inclement weather, corrosive vapors, abrasive dust, or any

other harmful elements. The jack must be cleaned of water, snow, sand or grit before using.

The jack must be lubricated periodically in order to prevent premature wearing of parts. A general purpose grease must be applied to all

zerk grease fittings, caster wheels, front axle wheels, elevator arm, handle base pivot bolts, release mechanism and all other bearing

surfaces.

IMPORTANT: Any jack found to be defective as a result of worn parts due to lack of lubrication or air/hydraulic system contanimated with

water, rust and/or foreign materials from the air supply or other outside source are not eligible for warranty consideration.

3. It should not be necessary to refill or top off the reservoir with hydraulic fluid unless there is an external leak. An external leak requires

immediate repair which must be performed in a dirt-free environment by an authorized service center.

IMPORTANT: In order to prevent seal damage and jack failure, never use alcohol, hydraulic brake fluid or transmission oil in the jack.

4. Every jack owner is responsible for keeping the jack labels clean and readable. Use a mild soap solution to wash external surfaces of the

jack but not any moving hydraulic components.

5. Inspect the jack before each use. Do not use the jack if any component is cracked, broken, bent, shows sign of damage or leaks hydraulic

fluid. Do not use the jack if it has loose or missing hardware or components, or is modified in any way. Take corrective action before using

the jack again.

6. Any hydraulic repairs within the warranty period must be performed by an authorized service center.

TROUBLESHOOTING

PROBLEM

1. Unit will not lift load.

2. Unit will not sustain load or feels "spongy" under load.

3. Unit will not lift to full height.

4. Handle tends to raise up while the unit is under load.

5. Unit still does not operate.

LIMITED WARRANTY

SUNEX INTERNATIONAL, INC. WARRANTS TO ITS CUSTOMERS THAT THE COMPANY'S SUNEX TOOLS

PRODUCTS ARE FREE FROM DEFECTS IN WORKMANSHIP AND MATERIALS.

Sunex International, Inc. will repair or replace its Sunex Tools

based upon the terms and conditions of the following described warranty plans attributed to that specific product. This product carries a ONE-YEAR warranty. During this

warranty period, Sunex Tools

will repair or replace at our option any part or unit which proves to be defective in material or workmanship.

Other important warranty information

This warranty does not cover damage to equipment or tools arising from alteration, abuse, misuse, damage and does not cover any repairs or replacement made by

anyone other than Sunex Tools

and under no circumstances shall we be liable for any incidental or consequential damages.

NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Return equipment or parts to an authorized service center, transportation prepaid. Be certain to include your name and address, evidence of the purchase date, and

description of the suspected defect. If you have any questions about warranty service, please write to Sunex Tools

may also have other rights which vary from state to state. Repair kits and replacement parts are available for many of Sunex Tools

not the product is still covered by a warranty plan.

SHIPPING ADDRESS:

Sunex Tools

315 Hawkins Rd.

Travelers Rest, South Carolina 29690

6606

branded products which fail to give satisfactory service due to defective workmanship or materials,

or its authorized warranty service centers. The foregoing obligation is Sunex Tools' sole liability under this or any implied warranty

MAILING ADDRESS:

Sunex Tools