18. After expiration of the set time the appliance automatically switches off and
a signal beeps ten times. The display shows 0:00.
19. If the ice cream is not removed after the "finished" signal, the automatic
cooling function switches on to prevent the ice cream from melting.
20. The automatic cooling function keeps the ice cream cold for a maximum of
one hour.
Remove ice cream
21. Before removing the ice cream from the appliance, switch off the appliance
with the POWER switch and unplug the power cord from the electrical outlet.
22. Remove the transparent lid.
23. Remove the ice cream container from the appliance and carefully pull the
mixer out of the container.
24. Transfer the ice cream to a suitable container. Do not use sharp or pointed
objects for this; instead, use a plastic or wooden spoon in order not to dam-
age the ice cream container. We recommend using a silicone dough scraper.
25. If desired, you can make more ice cream right away. In this case, start again
with step number 1.
26. Tip: If you make fruit ice cream or sorbet, remove the ice cream container as
soon as the program is finished, transfer the ice cream to a container suitable
for freezing and put this container in the freezer so that the ice cream freezes
completely. Otherwise, this ice cream may be slightly soft inside, even if it is
firmly frozen on the outside.
27. If you do not wish to make more ice cream, switch the appliance off with the
POWER switch and unplug it from the electrical outlet.
CLEANING AND CARE
Before cleaning, always turn off the appliance, unplug it from the electrical
outlet and allow the appliance to cool.
1.
Never clean the appliance with or under water or other liquids. It is espe-
cially important to keep the motor and the compressor from coming into
contact with water.
2.
Do not use harsh or abrasive cleaners.
3.
The removable parts can be cleaned in warm water with mild dishwashing
detergent. These parts are not dishwasher-safe.
30
Copyright UNOLD AG | www.unold.de