COLUMBIA VAC OPC1000N Manual Del Usuario página 25

CONTROL PANEL (fig.4)
Indicator - signals that the water tank is full.
The indicator will light up in red when the capacity of 2 l is reached.
This will additionally be indicated by a sound; then, the appliance will turn off.
To turn off the audible alarm, press any button.
Then empty the water tank and put in back in the right position.
Indicator - indicates that the device is connected to the power supply.
"POWER" button
To turn the appliance on, press the
When turning on the appliance for the first time and after connecting it to the power supply, a
standard program
After turning off the appliance with the
program, relative humidity level setting).
After disconnecting the power supply, the appliance will reset to the factory settings.
Do not directly remove the power cord plug to force the appliance to stop.
"MODE" button
To select the saved program, press the
The indicator light of the selected program will flash and start to illuminate continuously after
activating the program.
Continuous program
fan speed.
When this program is activated, you cannot change the fan speed or adjust the relative
humidity level.
Night program
When this program is activated, the fan speed is automatically set to low.
After 10 seconds of inactivity, the display and some controls are dimmed.
You cannot change the fan speed or set the relative humidity level.
When in this program, the dehumidifier maintains the relative humidity level at the range of 57% -
63% and the fan operates at a low speed.
- intended for turning the appliance on/off
button.
with a default setting of a relative humidity level of 50% RH is activated.
- allows a program to be selected.
button until the appropriate indicator lights up:
- continuous operation, the appliance will operate continuously at high
button, it will save the set parameters (selected
25