Options
High Temp
Raises main wash temperature to improve
cleaning for loads containing
tough, baked-
on food.
Sani Rinse
Sanitizes dishes and glassware in accordance
with
NSF International
NSF/ANSI
Standard
184 for Residential Dishwashers. Certified
residential dishwashers are not intended for
licensed food establishments.
Only sanitizing
cycles have been designed to meet the
requirements of the NSF/ANS1184
performance
standard for soil removal and
for sanitization
efficacy.
There is no intention,
either directly
or indirectly, that all cycles on
a NSF/ANS1184
certified dishwasher meet
the NSF/ANS1184
performance
standard for
soil removal and for sanitization
efficacy.
The Sani Rinse indicator
indicates at the end
of the cycle whether the Sani Rinse option
was successfully completed.
If the indicator
does not activate, it is probably
due to the
cycle being interrupted.
Smart Dry
Turnsthe heat element on at the end of the
wash cycle. Use rinse aid with or without the
Smart Dry option for best drying results.
Plastic items are less likely to deform when
loaded in the top dish rack.
Top Rack Only
For added convenience, use for washing a
small load of dishes in the top rack to help
keep the kitchen continuously
clean.
Bottom Rack Only
For added convenience, use for washing a
small load of dishes in the bottom rack to
help keep the kitchen continuously clean.
Can be selected
with
SmartWash ®HE
Pots & Pans
Normal Wash
SmartWash
®HE
Pots & Pans
Normal
Wash
Top Rack Only
Available with any
cycle except Quick
Rinse
Available
with any
cycle
Cannot
be used with
TurboZone ® option
Available with any
cycle
Cannot be used with
TurboZone ® option
What
it does
Raises the main wash
temperature
from 120°F
(49°C) to 140°F (60°C).
Increases the main wash
temperature
from 120°F
(49°C) to 140°F (60°C) and
the final rinse from 140°F
(60°C) to 155°F (68°C).
Turns the heat element on at
the end of the wash cycle.
Slightly faster wash for
smaller loads.
Slightly faster wash for
smaller loads.
Added time
to cycle
0:0 to 0:30
0:10 to 2:20
0:11 to 0:48
Saves up to
0:18
Saves up to
0:17
_The
maximum additional
water used for any combination
of options is 4.8 gal. (18.2 L).
Added
Water
**
Gallons
(Liters)
0 to 2.3
(0 to 8.8)
1 to 6.6
(4 to 25.1)
Delay Hours
Use this option to run your dishwasher during off-peak
hours. Local utility providers recommend
using energy during off-peak
hours when possible.
To delay the start:
1. Select a wash cycle and options.
2.
Press DELAY HOURS to choose the number of hours to be delayed.
3.
Press START/RESUME.
NOTE: Anytime the door is opened for more than 5 seconds (such as, to add a dish), the Start/Resume
button must be pressed
again to resume the delay countdown.
19