Mode Selection; Timer Function - Brandson Equipment 305041 Manual Del Usuario

6.1 Adjusting the speed levels
You can choose between three different speed levels. Press the "SPEED" button
("+" / "-" on the remote control) on the remote control or the control panel of the
air cooler adjust to the speed of the fan.

6.2 Mode selection

You can choose between natural and night modes. You can change the mode
using the "MODE" button. If you want to use the normal mode, press the button
till both the mode indicator lights stop glowing.
Night mode
The fan speed is set at medium level and the speed decreases by one level after
15 minutes to reduce the power consumption.
Note: The fan speed cannot be adjusted manually when the appliance is in night
mode.
Natural mode
The fan speed automatically changes between the available speeds and switches
off in between to ensure natural airflow.

6.3 Timer function

The air cooler offers various timer levels that can be adjusted hourly up to a
maximum time of 7 hours.
Switch-on timer
1. Make sure that the unit is connected to the mains and is in standby.
2. Press the timer button to select the desired time (one to seven hours).
3. The timer indicator lights flash while you are entering the time. After successful
setting and / or inactivity of 10 seconds, the status LEDs stop flashing and your
entry is accepted.
4. While the timer control lights are still flashing, select the desired additional
functions such as air cooling or oscillation.
5. To deactivate the switch-on timer, press the main switch twice.
Switch-off timer
To do this, press the "Timer" key on the remote control or on the control panel of
the fan. Press it repeatedly to increase the duration of the timer.
Switching off the timer function
To switch off the timer function, press the "ON/OFF" key twice.
31
English
-