Cleaning The Water Tank - Brandson Equipment 305041 Manual Del Usuario

3. Remove the filter and take the filter out of the filter housing.
4. Use a brush or vacuum cleaner to remove dust or particles from the dry
filter.
5. Then replace the air filter and the honeycomb filter into the filter housing
and mount it at the back of the appliance.

8.2 Cleaning the water tank

1. The water tank has to be cleaned at the latest after 2 weeks to prevent any
the formation of mould or bacteria.
2. Remove the water tank and clean it with a mild cleaning agent and warm
water.
3. Then dry the water tank with a soft cloth.
4. Replace the water tank.
Caution! Do not use boiling water to clean the tank.
8.3 Storage
Empty the water tank completely if you do not intend to use the appliance for a
long time and want to store it.
Allow the appliance to run in fan mode for four hours at low speed, so that the
inside of the appliance dries completely.
Then store the appliance in a dry place.
English
-
35