Kenmore PG-40409SOLB Manual De Uso Y Cuidado página 20

Front Doors
□ Remove the (4) M5x15 screws pre-assembled to the door handle ends, and use them to
□ Insert the pin at the top of each door through the hole in the door bracket hinge. Insert the pin
IMPORTANT: If the doors do not line up when closed or do not close freely, the hinges may need
to be adjusted. Loosen the hinge screws, adjust the hinge position as necessary, and retighten
screws. See B.
20
attach handles to doors. See A.
at the bottom of each door into the hole on the bottom panel. See B.
A
B
Hinge Screws