LG LWHD7000HR Manual Del Propietário página 14

Installation
9. Attach each Frame curtain the window sash
using screws (Type C).(See Fig. 6)
Do not drill a hole in the bottom pan.
The unit is designed to operate with
approximately 1/2" of water in bottom pan.
10. Slide the unit into the cabinet.(See Fig. 7)
For security purpose, reinstall screws(Type A) at
cabinet's sides.
11. Cut the foam-strip
insert between the upper window sash and the
lower window sash.
(See Fig. 8)
12. Attach the window locking bracket
type C screw. (See Fig. 9)
13. Attach the front grille to the cabinet by inserting
the tabs on the grille into the tabs on the front
of the cabinet. Push the grille in until it snaps
into place. (See Fig.10)
14. Lift the inlet grille and secure it with a type A
screw through the front grille.
(See Fig. 11)
15. Window installation of room air conditioner
is now completed. See ELECTRICAL DATA
for attaching power cord to electrical outlet.
14 Room Air Conditioner
to the proper length and
with a
11
Screw(Type A)
Screw(Type A)
Window locking bracket
Type C
7
Fig. 6
Power cord
Fig. 7
Foam-Strip
8
Fig. 8
11
Fig. 9
Fig. 10
Fig. 11