Instructions For Operators; How To Use The Vacuum Mattress - Boscarol Dolomites Folleto Informativo

non-respect of what specified in this information leaflet

4. SHIPMENT
The product is delivered to the buyer in a cardboard box. Check, on receipt, that the material delivered conforms completely
to the order and also that the material has not been damaged during transport, by making sure that the packaging is intact
and not open.
For any eventual anomaly, you must keep the packaging and contact the transporter and BOSCAROL
within 48 hours after delivery. Unless otherwise specified, merchandise travels at buyer's risk

5. INSTRUCTIONS FOR OPERATORS

The product has been made for a professional use. The operators, besides the necessary technical knowledge, must have
experience specifically in the sector of assistance, and, particularly, they must have obtained some skill in the use of
immobilization techniques. They also must be in a fit physical condition because they need to use strength and muscular
coordination so as to guarantee the maximum level of safety for the patient in every situation.
The vacuum mattress can be set to work only when there is absolute certainty of the efficiency of all its components and
devices. To ensure this, BOSCAROL carries out strict checks during production. However, you are advised to carry out a
further preventive check, as indicated in the schedule
Check each part of the mattress or of the purchased fittings to ensure that they do not
present visible faults
Check that the nylon cover does not have tears or cracks
Check the working of the valves fitted to each mattress
Check that the belts permit safe, quick immobilization.
If the test gives a positive result, the stretcher is ready to use, if not please contact BOSCAROL Technical Assistance
Service.
The test must be periodically repeated (see point "maintenance"), to ensure the perfect efficiency
of the product and the maximum safety conditions

6. HOW TO USE THE VACUUM MATTRESS

For perfect use, the intervention of 4 operators is needed.
1. Place the mattress near the patient to be immobilized.
2. Make sure that the material inside the mattress is uniformly distributed.
3. Connect the lift pump to the valve and, operating the pump, suck the air from the mattress (valve in "open" position
turn the appropriate knob counter-clockwise) modelling the mattress round patient's shape. If the vacuum
mattress is fitted with immobilization belts regulate their grip during the depression of the mattress.
4. When a sufficient consistency to guarantee the patient's immobilization is reached, close the valve (turn the knob
clockwise) and disconnect the pump tube.
5. At this point at least four operators can lift the mattress and place the immobilized patient on the most suitable
means for transport.
The improper use of the device can cause injury or damage to the patient.

The handling operations must be carried out with the utmost attention and coordination.

Rev. 12-2019 DOL
TEST DESCRIPTION
9 - 24
Results
Posit. Negat.