Specifications - Smarter tools ARC-100S Manual Del Usario

2.3 Specifications

Welding Output
Welding Current Range
Nominal DC Open Circuit Voltage (OCV)
Welding Output, 104º F (40º C), 10 min.
(quoted figures refer to SMAW output)
Rated Input Current (A) for STICK Welding
Rated Input Current (A) for TIG Welding
Rated Output for STICK Welding
Rated Output for TIG Welding
Duty Cycle (%)
Welder Type
Output Terminal Type
Mains Power
Number of Phases
Nominal Supply Voltage
Nominal Supply Frequency
Effective Input Current (l1eff)
Maximum Input Current (l1 max)
Classification
Protection Class
Standards
Cooling Method
Dimensions and Weight
Welding Power Source Mass
Welding Power Source Dimensions
(Height x Width x Depth)
The recommended time delay fuse or circuit breaker size is 30 amp. An individual branch circuit capable of
carrying 30 amperes and protected by fuses or circuit breaker is recommended for this application. Fuse
size is based on not more than 200 percent of the rated input amperage of the welding power source
(Based on Article 630, National Electrical Code).
Smarter Tools continuously strives to produce the best product possible and therefore reserves the right to
change, improve or revise the specifications or design of this or any product without prior notice. Such
updates or changes do not entitle the buyer of equipment previously sold or shipped to the corresponding
changes, updates, improvements or replacement of such items.
The values specified in the table above are optimal values, your values may differ. Individual equipment
may differ from the above specifications due to in part, but not exclusively, to any one or more of the
following; variations or changes in manufactured components, installation location and conditions and local
power grid supply conditions.
5 - 100 Amps
60V
50A / 22V @ 100%
80A / 23.2V @ 30%
90A / 23.6V @ 20%
33.5A
Io=90A@23.6V
Iο = 90A @ 23.6V
21.0A
Io = 100A@14V
90A / 23.6V @ 20%
100A / 14V @ 20%
20% @ 90A / 23.6V
Inverter Power Source
Dinse® 25
Single Phase
115V
50/60 Hz
15.0 Amps
Δ 33.5 Amps
IP23S
IEC 60974-1
Fan Cooled
9.7 lb. (4.4 kg)
H 13.0" x W 5.1" x D 9.0"
(H 330mm x W 130mm x D 230mm)
2-2