Stick (Smaw) Setup - Smarter tools ARC-100S Manual Del Usario

to the arc is dependent on the welding arc voltage, and as welding arc voltage
varies between different classes of electrodes, welding current at any one setting
would vary according to the type of electrode in use. The operator should use the
welding current range values as a guide then fine tune the welding current to suit
the application.

3.6 Stick (SMAW) Setup

This set up is known as DC Electrode Positive or reverse polarity. Please consult
with the stick electrode manufacturer for specific polarity recommendations.
Set Process Selection
Switch to Stick (SMAW)
Negative Output
Terminal (Dinse™ 25)
3-6