Browsing The Setup Menu - Promax DT-802 Manual De Instrucciones

To get into the available settings of a particular module, press ENTER
the module is displayed on the screen.
Every time you see a display module, the LED program of this module began to
blink.

4.7.2 Browsing the SETUP menu

1.- From the SETUP screen, pressing LEFT
see what modules are available.
2.- When you have the module you want to configure on the screen, press
ENTER
3.- Once inside the setup menu, press the Arrow keys LEFT
RIGHT
4.- When the menu option you want to access is displayed, press ENTER
5.- An arrow on the left-side of the selected option, means that you are into
the menu (Fig. 13.-). Now you can change the value displayed on the
screen or move to another menu.
Page 20
.
to move through the module setup options.
or DOWN
Figure 13.- Changing a parameter.
CONTROL MODULE. DT-802
or RIGHT you can
04-2015
when
or