Promax DT-802 Manual De Instrucciones página 77

CONTROL MODULE. DT-802
4.7.4.2 Configuration options DT-802.
The options of the menu CONFIGURATION at the module of control DT-802 are:
- Manual Assigment.
If the Auto assigment done automatically by the system when starting does
not match the actual location of the modules in the rack, this option allows you
to change this assigment manually.
1.- Press ENTER
arrows you can see the correspondence between the current
location assigned (second line) and the modules (third line).
2.- Press ENTER
next to it) and you can move the third one, which is the name of the
modules, using LEFT
04-2015
to get into the menu. With RIGHT
Figure 16.- Manual assignment.
again. The second line is selected (it shows an arrow
and RIGHT
Figure 17.- Change of placement module.
and LEFT
arrows.
Page 25