ARENDO 302689 Manual De Usuario página 21

4 Getting started
Please remove the kettle and the base plate from the packing and clean the
device with a damp cloth. Then you have to connect the base plate to a properly
installed grounded socket.
Wipe the surface of the water kettle with a slightly moistened cloth. In order to
eliminate possible production residues, fill the water resevoir with cold water to
its maximum level. Boil the water up and pour it away. Repeat these process if
necessary.
5 Usage
At first, open the kettle. To do this, pull the cover on the plastic-handle to the top.
Please fill it with cold water. There is a scale on the exterior of the kettle. Please do
not fill the case above the maximum mark. Then put the lid on the kettle.
Note:
Experienced people concerning to the handling of the product can fill the water
kettle with the help of the spout. So it is not necessary to open the lid. This saves
time and it is especially useful when the water kettle is still hot.
21
English