DE
16. Do not take off the jug assembly before the motor has completely stopped.
Crushing of ice
EN
17. You can crush the ice cubes directly. For rapid crushing we recommend to
fill first a small amount of water into the glass jug and then to add the ice
FR
cubes.
NL
18. Fill the ice cubes into the jug or add it one by one through the opening in
the lid.
IT
19. Press the quick break switch several times, until the ice is sufficiently
crushed.
ES
PL
CLEANING AND CARE
Switch off the appliance and disconnect the plug from the outlet.
1.
Do not use any sharp or scouring cleansers which might damage the surface.
2.
Do not immerse the motor block into water. Wipe it with a damp cloth and
dry it with a soft cloth. Take care that no water penetrates into the motor
block.
3.
Empty the jug before disassembling and cleaning it.
4.
You may clean the jug and the knife easily by using the quick break switch.
Fill some warm water and some drops of a mild cleanser into the jug and
operate the quick break switch for a few seconds. Rinse with clear water.
5.
Optionally you can disassemble the jug for cleaning. Unscrew the knife
clockwise.
6.
Carefully place the knife block in the container after cleaning.
7.
All detachable parts of the jug assembly can be cleaned in warm soapy
water. Attention: The glass jug itself must not be immersed in water!
CAUTION!
The knife is extremely sharp, be careful when handling and cleaning it.
8.
Strong odours from onions or garlic can be removed with lemon juice.
9.
All parts must be dried completely before reassembling the jug.
26 von 76
Copyright UNOLD AG | www.unold.de
Stand 18.2.2020