Custom Program; Steam Functions - LG DLEX3370 Serie Instrucciones Y Manual Del Propietario

36
HOW TO USE

Custom program

If you have a special combination of settings that you
use frequently, you can save these settings as a CUSTOM
PROGRAM.
To Save a Custom Program:
select the desired cycle.
that cycle.
would like to add. A confirmation message will be
shown in the display.
seconds.
NOTE
You may save only one custom program at a time.
Pressing and holding the CUSTOM PROGRAM button
will overwrite any previously saved custom program.
To Recall a Custom Program:

Steam functions

To Fill the Steam Feeder
Steam
Feeder
drawer until it clicks into place.
NOTE
filled with water up to the MAX line. If not, an error
message will be displayed. Make sure that the steam
feeder is filled with water or the drawer is fully closed.
Turn the dryer off then restart the Steam Cycle.
Drawer
foreign substances, rinse agents, or detergents.
is empty.
the steam generator will not work.
otherwise water may overflow.
and the drawer before starting the dryer.
WARNING
can cause serious injury or death.
follow this warning can cause serious injury or death.
Tap Water
ONLY
Failure to follow this warning
Failure to