Hama 00090917 Instrucciones De Uso página 19

Exhibit 4: File Operation
Exhibit 5: File Copy
4. Playback screens
Actions:
During Playback, press ENTER and info bar displays on
the screen. Then select a function item by pressing
and press ENTER to perform the corresponding function.
(Exhibit 6)
Press MENU to return to file list display screen.
4.2 Picture display screen
Image rotation
Status indicator Stop
Play/Pause
Exhibit 6: Picture Playback with Info Bar
20
Zoom Previous image
File information
File browser
Next image Resolution
Wall mounting:
There are installation holes on the rear of the digital
picture frame to attach it to the wall using suitable
screws.
Picture viewing:
Insert a memory card and switch on the digital picture
frame. The start screen appears after a few seconds.
The preset mode of the digital picture frame displays the
data on the memory card.
Use as a card reader:
You can connect your digital picture frame to your
computer via USB to access files on the inserted
memory card or exchange/copy/delete data via the USB
interface. You must switch the digital picture frame off
before connecting it to your computer via USB. Proceed
as follows to connect it:
• Switch the digital picture frame off
• Connect the USB cable with the picture frame
(USB connection cable: A-connector with
mini USB B-connector (B5 pin))
• Connect the digital picture frame to your computer
• Insert a memory card in the slot of the picture frame
• Switch on the digital picture frame using the „ON"
main switch
After connecting the picture frame, it changes to USB
mode. You can now access the memory card inserted in
the picture frame using Windows Explorer.
WARNING: During the automatic slide show or display
of individual images, no USB connection is
possible. It is also not possible to start a
slide show or view files while the digital
picture frame is in operation.
Cleaning & Care:
Occasional care and cleaning of the device ensure a
long service life. Use a soft, lint-free cloth (e.g. Hama
item no. 42267/51076/51077/78399, etc.) to clean the
device. Slightly dampen the cloth if the device is very
dirty. However, never use strong solvents such as
alcohol, petrol or thinners. This could attack the casing
or the protective glass of the display.