Hama 00090917 Instrucciones De Uso página 26

Files are not displayed:
Cause: Resolution too high
Please note that loading requires a lot more time for
large file sizes. Reduce the image size (dimensions in
pixels) if required.
The sound is heavily distorted (varies according to the
device specification):
Cause: The volume level is too high
Reduce the volume level until the distortion disappears.
USB devices are not displayed when connected.
Cause: incompatible USB protocol
Not all devices support USB communication in the same
way. If in doubt, test another device with the digital
picture frame.
Data on a memory card can not be accessed.
Cause: incompatible memory card or incorrect data
media format
There are some types of memory cards/media that are
not compatible with the digital picture frame. In this
case, the card is not recognised and can not be used to
display or play files. Check whether the card uses the
FAT or FAT32 file system.
The file name does not completely appear in the file
menu or appears abbreviated.
Cause: File name is too long
The digital picture frame supports file names. File
names that are too long can not always be fully
displayed due to the limited display size and are
therefore abbreviated. If the file name contains special
characters and/or umlauts, these may be replaced by
special characters/symbols.
Specifications:
Display: 27,94 cm (= 11.0) TFT LCD display;
800 x 480 pixels
USB port: USB 2.0 high speed
Storage media for: CF/SD/SDHC/MMC/MS/XD
Image format: JPEG, JPG, BMP, PNG, TIF, TIFF, GIF
Film format: Motion JPEG, MPEG 1/2, MPEG 4, DivX,
Xvid, Avi
Outputs: USB connection (host & device)
Power supply: AC/DC Adapter (12 V, 1.5 mA)
Operating temperature: 0°C ~ 30°C (32°F ~ 85°F)
Dimensions: approx. 30,0 x 4,2 x 23,3 cm (W x D x H)
Space requirements: approx. 30,0 x 20,5 x 23,3 cm
(W x D x H)
Relative humidity: 40–64 % RH (non-condensing)
WARNING:
So-called pixel errors can occur depending on the
manufacturing process. These manifest themselves as
white or black pixels that permanently light up during
display. Within the context of production tolerances, a
max. 0.01% of these pixel errors measured on the total
size of the screen are permitted as a tolerance and do
not represent a product fault.
Support and contact information
If the product is defective:
Contact your retailer or Hama Product Consulting if you
have any product claims.
Internet/World Wide Web
Product support, new drivers and product information
are available at www.hama.com.
Safety notes
• The device is appropriate for indoor use only,
not for outdoor use.
• Do not open the device casing.
• Keep the device away from sources of heat.
• Do not operate the device in damp or dusty
environments.
See www.hama.com for the declaration of conformity with
R&TTE Directive 99/5/EC.
1177
27