Kenwood KDC-610U Guia De Inicio Rapido página 5

Detaching/ Attaching the faceplate
!
• Remove the faceplate at once after
pressing the Release button; otherwise it
can fall down due to vibration.
• The faceplate is a precision component of
the unit and can be damaged by shocks
or jolts.
• Keep the faceplate in its case while
detached.
• Do not place the faceplate (and case) in
areas exposed to direct sunlight, excessive
heat or humidity. Also avoid places with
too much dust or the possibility of water
Press the
Release button.
splashing.
Power
To turn the power ON, press [SRC].
To turn the power OFF, press and hold
[SRC].
English | 5