Extraordinary Maintenance - BAT 2040 Manual Para Uso Y Mantenimiento

Use and maintenance manual
· Qualified personnel are not required for ordinary maintenance operations.
The operations described below will keep the product in good condition if they are performed according to the
indicated frequencies and timeframes.
Twice a year
Check the cleanliness of the aluminium components.
Perform frequent checks on the installation, and visually check whether there are any signs of wear or not.
Contact Technical Support if necessary.
The fabric must be visually inspected to check whether there are any tears or ruptures in the stitches.
Yearly
Check that moving parts are operating correctly, contact Technical Support if necessary.

5.4 Extraordinary maintenance

A specialised technician must check the correct operation every two years.
· All extraordinary maintenance operations must be performed by qualified and trained personnel.
Request specialist assistance from Technical Support.
· In the event of a potential dismantelling of either the product or part of it, see the instructions of the
assembly, the installation and the siting.
· Original spare parts must be used or the warranty shall lapse.
· All maintenance operations must be performed with the electrical supply disconnected.
Requests for spare parts must be sent to your reseller.
THE PRODUCT WARRANTY WILL LAPSE IF SCHEDULED AND EXTRAORDINARY MAINTENANCE ARE
NOT PERFORMED.
06/09/2019 Rev.05
2040
27